HIKVISION DS-2TD2636B-10/P FEVER SCREENING THERMAL & OPTICAL NETWORK BULLET CAMERA

The Hikvision DS-2TD2636B-10/P is a high-precision thermal-optical network bullet camera specially engineered for fever-screening and elevated skin-temperature (EST) detection in high-foot-fall environments such as airports, hospitals or corporate lobbies. With a dual module capturing thermal (384 × 288) and optical (4 MP) imagery, the camera monitors human body-surface temperatures in real time within a range of approximately 30 °C to 45 °C with ±0.5 °C accuracy. Smart functions such as bi-spectrum image fusion (overlaying optical detail on thermal view), picture-in-picture display and selectable temperature-measurement rules (points, areas, lines) enable rapid identification of individuals exceeding preset thresholds. Designed for networked deployment, the DS-2TD2636B-10/P supports H.265/H.264/MJPEG compression, ONVIF profiles (S/G/T), PoE or 12 V/24 V power, and includes alarm I/O and micro-SD support up to ~256 GB for local recording. The IP66-rated bullet housing withstands outdoor conditions, making it suitable for semi-outdoor temperature-screening setups (though note thermal screening accuracy may be best-achieved in controlled ambient environments). Overall, the DS-2TD2636B-10/P offers a robust, high-accuracy solution for preliminary health-screening and people-flow monitoring with thermal imaging and intelligent alerting built-in.

Key Features

Dual-Spectrum Thermal + Optical Imaging: Incorporates both 384 × 288 thermal and 4 MP optical modules for temperature screening and visual identification.
Body-Surface Temperature Measurement: Measures surface temperatures between ~30 °C to 45 °C with ±0.5 °C accuracy; supports multiple rule types (points/areas/lines).
Smart Imaging Functions: Bi-spectrum fusion, picture-in-picture, 3D DNR (digital noise reduction) enhance image clarity and situational awareness.
Network & Alarm Integration: Equipped with alarm I/O, on-board micro-SD (up to 256 GB), PoE/12 V/24 V power, ONVIF profiles and compressed video formats (H.265/H.264/MJPEG).
Outdoor-Rated Housing: IP66 protection rating for dust and weather; designed for integration into entry-screening or perimeter monitoring setups.

Technical Specifications Table

FAQ Section

1. Can this camera reliably screen body temperature in an outdoor setup?
While the DS-2TD2636B-10/P can operate in outdoor configurations, the specified accuracy (±0.5 °C) is typically achieved under controlled ambient conditions (within 10 °C to 35 °C, indoor usage) as per manufacturer guidance.
2. Does the camera provide full video surveillance and thermal alerts together?
Yes — it combines a 4 MP optical sensor for regular video surveillance and a thermal imager for temperature detection, with alarm support when thresholds are exceeded. 
3. Is this a medical device for diagnosing fevers?
No — this camera is designed for preliminary temperature-screening (Elevated Skin Temperature detection). It is not a medical diagnostic device and should be used only as a first-level screening tool.
4. What are the installation requirements for temperature detection?
Install in an area with stable ambient temperature, minimal air flow, no direct sunlight on subjects, and maintain consistent distance and calibration to ensure accuracy.
5. How is alerting handled when a person exceeding threshold is detected?
When a measured point/area/line exceeds the preset temperature threshold, the camera triggers an alarm output, records an image/event and can upload to FTP/email or activate SD recording.